[email protected]

DIN 1.0976 Plates Supplier, Stockist in Mumbai India

Structural Steel Plate - EN 10149-2 / WNR. 1.0976:QUALITY:S355MC:ROLLING STATE:AR- As rolled:Standard:ASTM, ASME and API:Size:0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH:Hardness:Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. Grade:EN 10149-2 S355MC DIN 1.0976:DIMENSIONS Differences Between Grades S355JR and S355MC - BEBON 10mm thickness S355MC steel plate in under EN 10149-2. It is a Thermo-Mechanically rolled fine grained hot rolled weldable material. 10mm thick S355MC steel plates are suitable for cold forming. The 10mm thickness S355MC steel plate yield strength is 355MPa min.

EN 10149 Steel - EN 10149 Supplier Steel Warehouse

EN 10149-2 addresses technical requirements for thermomechanically rolled high yield strength steels. EN 10149-2 defines the following grades:S315MC, S355MC, S420MC, S460MC, S500MC, S550MC, S600MC, S650MC, S700MC, S900MC, S960MC. EN 10149-3 addresses technical requirements for normalized or normalized rolled high yield strength steels. EN 10149-2 S700MC high yield structural steels Plates We at Champak steel trade, manufacture and supply EN 10149-2 Grade:S700MC plates.We have a range of products that are quality tested and offer amazing usability. Our S700MC plates are structural steels developed for applications that require high yield strength. It can be used in many load bearing applications for its high yield. High Strength Low EN 10149-2 S355MC Steel Plate Supplier EN 10149-2 S355MC Plates Manufacturer Marc Steel is a well-known exporter and trader of EN 10149-2 S355MC Plates, which has a number of outstanding features to provide like having high durability, robust construction, precise dimension and more. EN 10149-2 S355MC Plates Buy High Tensile Plates EN 10149-2 S355MC at reasonably priced rate from us.

Hot Rolled Products - LIBERTY Steel Group

EN 10149-2 S315MC; S355MC, S420MC; S460MC, S500MC High strength, improved weldability, weight saving Standard feasibility range Standard feasibility range Prior acceptance by the mill is mandatory Prior acceptance by the mill is mandatory S315MC Thickness [mm] Width [mm] S355MC - Salzgitter FlachstahlS355MC High-strength steels for cold-forming, thermomechanically-rolled Available dimensions Hot-rolled coils unpickled, mill edge Thickness in mm Width in mm 2.00 2.24 900 400 2.25 2.49 900 450 2.50 2.99 900 500 3.00 3.99 900 680 4.00 2.70 900 750 Widths < 900 mm and thicknesses > 2.70 mm on S420MC - Salzgitter FlachstahlThe provisions of DIN EN 0 49-2 shall apply for delivery and inspection, chap-ters 7.2 and 8. The products are delivered in a condition obtained by normalised rol-ling. Test certificates according to DIN EN 0204 can be supplied as follows:EDP, remote data transmission, fax, e-mail, paper.

S460MC Tata Steel in Europe

Tata Steel. Tata Steel. EN 10149-2:2013. Germany SEW 092. Grade. Grade. Grade. Grade. Ympress S315MC. XF315. S315MC. QStE340TM. Ympress S355MC. XF355. S355MC. QStE380TM SSAB Domex 355MC - Warde Steel and MetalsSSAB Domex 355MC meets or exceeds the requirements of S355MC in EN 10149-2. Upon agreement, it can be delivered as double certified. for width and length are according to SSAB standard and offer narrower width and length tolerances compared to EN 10051:2010. For coil and sheet with mill edge, the width tolerances are corresponding to -0/+20 SSAB LASER 355MC PLUSSSAB Laser 355MC Plus according to EN 10149-2 is delivered in thermo-mechanically rolled condition. Surface and edge conditionSSAB Laser 355MC Plus is available as non-pickled or pickled surface with mill or cut edge. Fabrication and Other recommendations SSAB Laser 355MC Plus has ideal laser cung, cold forming and welding performance.

Strenx 700 MC - Structural steel with excellent cold

Strenx® 700MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 700 MPa for stronger and lighter structures. Strenx® 700MC meets or exceeds the requirements of S700MC in EN 10149-2. Typical applications include a wide range of components and parts in demanding load-bearing structures.EN 10149-2 S355MC Steel Plate and EN 1.0976 Sheet/ Shim S355MC EN 10149-2 STEEL PLATES is the European Standard for hot-rolled flat products made of high yield strength thermo-mechanically rolled steels for cold forming. It is encompassed by this specification have minimum yield strengths ranging from 315 MPa to